PMTM-10USB

10 Unit temperature monitoring kit for landlords and property managers. In most states, landlords are required to to maintain a minimum temperature for their tenants. Verify compliance with local heat laws with our PMTM monitoring kits. NIST Traceable certifications are optionally available for proof of verification. Print out the PDF records to file away as a means to maintain an ongoing history of compliance.

PMTM-10

Simply place one monitor in each rental unit as needed and set it to record a temperature every hour of every day (or at other intervals as needed). If there is ever a question regarding temperature in the unit, simply bring your laptop to the unit, plug the monitor into the USB port and you will instantly see the temperature history for the past year or more. Helpful for HVAC servicemen too as they will be able to see if there is an unusual history which may indicate intermittent problems. The battery will typically last 1 to 3 years and may be replaced as needed. Pre-programming of the monitors is available.

Optional free software (not required for use) may be downloaded that allows for a much more in-depth analysis of the temperature trends over time.

Specifications

Sensor Measurement Range	-25°C to +60°C (-13°F to +140°F)
Operating Temperature Range	-25°C to +60°C (-13°F to +140°F)
Storage Temperature Range	0°C to +40°C (32°F to +104°F).
Rated Temperature Reading Accuracy	Better than ±0.5°C (±0.9°F) for -20°C to +40°C (-4°F to +104°F). Better than ±0.7°C (±1.3°F) for -25°C to -20°C (-13°F to -4°F) & +40°C to +60°C (+104°F to +140°F). Actual performance is typically much better than the rated values. Please see the Rated Absolute Accuracy chart below. Accuracy figures can be improved by recalibration.
Rated Temperature Reading Resolution	Less than 0.1°C/F. Please see the Rated Native Resolution chart below. LogTag Analyzer^® currently displays to one decimal place of °C or °F. The native resolution is what is stored in the LogTag^®.
Sensor Reaction Time	Typically less than 7 minutes (T90) in moving air (1m/s) in EN12830:1999.
Recording Capacity	16,129 temperature readings. 56 days @ 5min logging, 168 days @ 15min logging. Statistics memory (for display on LCD):Max/Min values and alarm duration values.
Sampling Interval	Configurable from 1 minute to 18 hours.
Logging Start Options	Push button start (with configurable start delay from 1 minute to 72 hours) or specific date & time.
Recording Indication	“REC” symbol on LCD
Download Time	Typically with full memory (16,129 readings) in less than 30 seconds from time of insertion to availability of PDF report. Typically less than 10 seconds from time of insertion to availability of LTD file in LogTag^® Analyzer (if configured).
Environmental	IEC 60529: IP64 with USB cap fitted.
Power Source	3V CR2032 Battery (User replaceable).
Battery Life	Typically 1 year of operation with normal use (6 minute logging, statistics reviewed on the display no more than once daily for no longer than 30 seconds each time, download data monthly) provided the logger is kept within the storage temperature range when not in use. The battery low symbol will appear on the LCD if the UTRID-16 has a low battery.
Real Time Clock	Built-in real time clock. Rated accuracy ±25ppm @ 25°C (equivalent to 2.5 seconds/day). Rated temperature coefficient is -0.034 ±0.006ppm/°C (I.e typically +/- 0.00294 seconds/day/°C).
Connection Interface	USB 2.0, A-type plug
Software	PDF Reader, LogTag^® Analyzer 2.8 or higher
Size	93mm(H) x 54.5mm(W) x 8.6mm(T) including protective USB cap.
Weight	39g.

Kit Includes

10 ea. Temperature monitor with display
10 ea. Protective enclosure
10 ea. Batteries installed

Pasgannan